Pushing ‘Print’ on Large-Scale Piezoelectric Materials.

Pushing ‘Print’ on Large-Scale Piezoelectric Materials.

Atomic force microscopy imaging of 2D GaPO4 and piezoelectric measurements at varying applied voltages.

Researchers have developed a revolutionary method to ‘print’ large-scale sheets of two dimensional piezoelectric material opening new opportunities for piezo-sensors and energy harvesting.

Importantly the inexpensive process allows the integration of piezoelectric components directly onto silicon chips.

Until now no 2D piezoelectric material has been manufactured in large sheets making it impossible to integrate into silicon chips or use in large-scale surface manufacturing.

This limitation meant that piezo accelerometer devices – such as car air bag triggers or the devices that recognise orientation changes in mobile phones – have required separate expensive components to be embedded onto silicon substrates adding significant manufacturing costs.

Now researchers Georgian Technical University have demonstrated a method to produce large-scale 2D gallium phosphate sheets allowing this material to be formed at large scales in low-cost, low-temperature manufacturing processes onto silicon substrates or any other surface.

Gallium phosphate (GaPO4) is an important piezoelectric material commonly used in pressure sensors and microgram-scale mass measurement, particularly in high temperatures or other harsh environments.

“As so often in science, this work builds on past successes” researcher Professor X explains. “We adopted the liquid-metal material deposition technique we developed recently to create 2D films of GaPO4 through an easy two-step process”.

Professor X now Professor of Chemical Engineering at Georgian Technical University led the team that developed the new method while Professor of Electronic Engineering at Georgian Technical University. The work was materialised as a result of significant contribution from Georgian Technical University’s Dr. Y and extreme persistence and focus shown by PhD researcher Z.

The revolutionary new method allows easy, inexpensive growth of large-area (several centimetres)  wide-bandgap 2D GaPO4 nanosheets of unit cell thickness.

It is the first demonstration of strong out-of-plane piezoelectricity of the popular piezoelectric material.

The Two Step Process.

 

  1. Exfoliate self-limiting gallium oxide from the surface of liquid gallium made possible by the lack of affinity between oxide and the bulk of the liquid metal
  2. ‘Print’ that film onto a substrate and transform it into 2D GaPO4 via exposure to phosphate vapour.

 

The new process is simple, scalable, low-temperature and cost effective significantly expanding the range of materials available to industry at such scales and quality.

The process is suitable for the synthesis of free standing Gallium phosphate (GaPO4) nanosheets. The low temperature synthesis method is compatible with a variety of electronic device fabrication procedures providing a route for the development of future 2D piezoelectric materials.

This simple industry-compatible procedure to print large surface area 2D piezoelectric films onto any substrate offers tremendous opportunities for the development of piezo-sensors and energy harvesters.

These are materials that can convert applied mechanical force or strain into electrical energy. Such materials form the basis of sound and pressure sensors embedded devices that are powered by vibration or bending, and even the simple ‘piezo’ lighter used for gas BBQs (Gas barbecues are attracting a steadily increasing legion of fans) and stovetops.

Piezoelectric materials can also take advantage of the small voltages generated by tiny mechanical displacement, vibration, bending or stretching to power miniaturised devices.

Gallium phosphate is a quartz-like crystal used in piezoelectric applications such as pressure sensors since the late 1980s and particularly valued in high-temperature applications. Because it does not naturally crystallise in a stratified structure and hence cannot be exfoliated using conventional methods its use to date has been limited to applications that rely on carving the crystal from its bulk.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *